01-06-2013, 08:30 PM
|
#605
|
Senior Member
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
|
Re: What I Did on My Lunch Hour
Quote:
Originally Posted by Shadetree
Looks like the T must come out. You could drill the sending unit out a little and use an easy-out. But if you leave the T on the car the steel shavings will go right into your engine when you drill it.
|
Bud, it’s not really a "T", it is just a brass fitting for the sending unit, and the actual "T" is in the line, about an inch below where the brass fitting is. I'm not sure that I want to try and remove the fitting coming from the oil filter, to try and remove the "T" tube, that looks like I'd be opening a real can of worms... I've got solvent on the fitting so, hopefully tomorrow it will be a bit more cooperative... we'll see.
__________________
Imagination is more important than knowledge.
|
|
|