Quote:
Originally Posted by JSeery
Not super clear in the Green Book diagram, but the bearing is #3123 and goes on top of the axle. #3121 is the felt and goes below the axle.
Not sure why TJ believes you need to add anything to the spindle? I use the 33-34 axles with later spindles, but a 32 axle would work just as well (just more expensive to come by!  ). Unless you were to use an aftermarket spindles that do not have the arms forged into them. |
If you reread my post I told the OP that the pins that he has in his shop were for the 42-48 spindle. It appears they are 6" long and do not have the cup on top. If he were to use a 42-48 spindle with them he would need the aftermarket steering arm with the '32 drag link.