View Single Post
Old 02-24-2020, 11:07 PM   #3
JHFORD51
Senior Member
 
Join Date: Feb 2011
Posts: 253
Default Re: 50 Mercury OD problem

If you have the solenoid rod correctly engaged into the pawl (as in you put the solenoid on and gave it aquarter turn) and you are hearing it "click" then I might suspect you have internal problems. The solenoid is supposed to push the pawl in towards the balk ring and when the ring spins around the pawl locks in thereby engaging the OD. There's more to it but if the trans is otherwise not noisy, I would suspect the balk ring...
JHFORD51 is offline   Reply With Quote