Quote:
Originally Posted by Bored&Stroked
Hey Herm - just checking . . . RODS, not mains??? I can see a fixture for the mains working, but the rods - that has to be complex! It would have to somehow rotate/articulate with the crankshaft rotation - that seems to be a hard situation to ponder - unless it indexed off the mains in some fashion.
Just curious!
|
The best one was built by Sunnen, Model KN, look on E-Bay. It was made to be used just for Rods mostly when just one pin went bad. You jacked the car up, pulled the pan, put an electric motor and V-belt to turn the crank, the machine was clamped to the pinand the metal was ground the main part of the pin, and centered of, I Think ????????? off the Radius to keep the same stroke.
Herm.