The Ford Barn - View Single Post

HDowse · 06-14-2021, 06:08 AM

I had good luck with a similar crack but under the water pump area. I used a Dremel tool to V out the crack, lots of air to dry it out and did the JB weld on it. Still holding 20 years later.

06-14-2021, 06:08 AM	#14
HDowse Senior Member Join Date: May 2010 Location: Hancock, New Hampshire Posts: 375	Re: Is my block dead? I had good luck with a similar crack but under the water pump area. I used a Dremel tool to V out the crack, lots of air to dry it out and did the JB weld on it. Still holding 20 years later.