The Ford Barn - View Single Post

Tom Wesenberg · 07-15-2014, 07:41 AM

Don't force anything when you try to seperate the engine from the tranny. Make sure ALL the bolts have been removed. I've read a couple of broken parts threads when a bolt was missed.

Be sure to remove the throttle cross linkage first, and install it last, so it doesn't get damaged or mess up the firewall paint.

07-15-2014, 07:41 AM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: YIPPEE!!! Started engine replacement!! Don't force anything when you try to seperate the engine from the tranny. Make sure ALL the bolts have been removed. I've read a couple of broken parts threads when a bolt was missed. Be sure to remove the throttle cross linkage first, and install it last, so it doesn't get damaged or mess up the firewall paint.