View Single Post
Old 02-10-2018, 12:56 PM   #15
Purdy Swoft
Senior Member
Purdy Swoft's Avatar
Join Date: May 2010
Location: Alabama
Posts: 7,051
Default Re: Replacement Ignition Coil

Some have claimed that the epoxy filled flame thrower coils get too hot to touch . I have had no such problem with mine . I could use either the epoxy or oil filled version as long as they are mounted correctly. A high voltage performance coil will no doubt get warmer than a low voltage coil but not that hot . The epoxy version was recommended so I use it . No problems in 12 years .I can grab and hold mine with no discomfort . If others are having problems with the flamethrewer coil , there is no telling what their problem may be . A lot of people use them with results the same as mine .
Purdy Swoft is offline   Reply With Quote