Thread: New block
View Single Post
Old 05-13-2017, 07:30 PM   #128
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 5,116
Default Re: New block

Quote:
Originally Posted by Tod View Post
I'd like to get my hands on a junk 21 stud block. My idea is to make a 21 stud block with most of the same model and make changes as needed. I can't go into all the details of how I will do all of this because most of it is specialized to tooling guys and maybe a vey good foundry man. I have basically designed this while trying to sleep since I decided to do it. If the same basic deck height, crank/cam locations, valve locations and exhaust ports are close, or the same, I can do both blocks very easily. If the rear will suffice as an 8BA style that would be better.

Tod
Tod..........Some basic (yet critical) dimensions you need to be aware of. Click the thread below. Bored & Stroked has lengthy details in POST #32, as a place to start. DD

https://www.fordbarn.com/forum/showt...lve+centerline
__________________
T5 W/TORQUE TUBE


I may not be the BEST, but I'll do 'til he gets here!




V8COOPMAN is offline   Reply With Quote