The Ford Barn - View Single Post

40cpe · 02-12-2017, 01:54 PM

Sponsored Links (Register now to hide all advertisements)

If it is a 95% filter system, make sure the oil from the pump goes to the inlet side of the filter. If the lines are swapped the backflow valve in the filter will stop the flow.

02-12-2017, 01:54 PM	#6
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: 59 V8 rebuild, no oil pressure Sponsored Links (Register now to hide all advertisements) If it is a 95% filter system, make sure the oil from the pump goes to the inlet side of the filter. If the lines are swapped the backflow valve in the filter will stop the flow.