View Single Post
Old 09-22-2011, 04:16 PM   #9
Big_Guys_baby
Senior Member
 
Join Date: Mar 2011
Location: North Carolina
Posts: 191
Default Re: Any tips for transmission,torque tube, and rear end install

I have the alignment tool and I have done clutches on other vehicles before, just not a flathead... Was curious how people turned the engine over so that the pressure plate bolts lined up the cutout at 12:00 o'clock on the engine bell housing to get the socket in.

Thanks guys really appreciate it!
Big_Guys_baby is offline   Reply With Quote