Quote:
Originally Posted by CA Victoria
Here is an older set my friend had. They are forged and a little bit shorter than the ones made today. The new arms are made heavier too. The shock stud boss is welded on and the stud pressed in. With these the original bolts are used and the sleeves with hex nut heads are threaded inside go over the original bolt.
When I set these up I will post the bolt size I used.
|
Seems like I have seen that iteration in the past. I stand to be corrected, but I don't believe Ford made that pair. They just appear to be a bit crude for Ford production.
Below is a forged pair, much cleaner in design and appearance than above, but I'm still not sure these are original Ford pieces, either.
This drawing BELOW is supposed to represent the original Ford pieces. DD
Now, for a RELATIVELY new bracket that is the 'nuts' is this beauty from
"Mac's Speed" in New Zealand.....NOT any other Mac's! They will bolt-on to 1935 through 1948 axle bells. Contact Graeme McNeill....email:
[email protected]. These are $265/pair SHIPPED! These are really good looking. LINK Below! DD
https://www.jalopyjournal.com/forum/...t-kit.1127115/
.