Originally Posted by
Werner
My nice Little Green Roadster had mounted the modern plate and points when buying.
I wanted to equip to original and ordered the early base plate and the original replica contact points and the capacitor. Remodeled, and as I wanted to set the contact points with the maggot screw, I saw that the angle of the points was not parallel, they only touched on one outer edge. That's bad and that's why I had to put back on the modern base plate angrily. Was 'Made in USA'.
I also had that mis-alignment problem, filed the mounting holes for stationary point block so it could be adjusted to line up.
------------------------------------------------------------
Brattons sells a modified point block that corrects this issue. New original style points
arm is too long. Brattons are the only vendor to offer this point block. I recently converted back to original design parts, had issues with the nurex wireless plates. The original parts with this point block has been working perfectly.
https://www.brattons.com/machined-di...int-block.html