Quote:
Originally Posted by Werner
My nice Little Green Roadster had mounted the modern plate and points when buying.
I wanted to equip to original and ordered the early base plate and the original replica contact points and the capacitor. Remodeled, and as I wanted to set the contact points with the maggot screw, I saw that the angle of the points was not parallel, they only touched on one outer edge. That's bad and that's why I had to put back on the modern base plate angrily. Was 'Made in USA'.
|
I also had that mis-alignment problem, filed the mounting holes for stationary point block so it could be adjusted to line up.