The Ford Barn - View Single Post

Oakridgeacres · 04-04-2012, 10:42 AM

I installed a (REX-A-CO) gauge a couple weeks ago. Installed per instructions from an earlier post. Gauge seems to work just fine. About 7# pressure when you first start up on a slight rev, but as oil gets warmer it goes down to just above readable when cruising at about 45mph. Is this about what other's have encountered with oil pressure gauges? Thought this was an appropriate question to go along with original post.

04-04-2012, 10:42 AM	#8
Oakridgeacres Junior Member Join Date: Oct 2011 Location: Brookville, Pa. Posts: 8	Re: Gauges I installed a (REX-A-CO) gauge a couple weeks ago. Installed per instructions from an earlier post. Gauge seems to work just fine. About 7# pressure when you first start up on a slight rev, but as oil gets warmer it goes down to just above readable when cruising at about 45mph. Is this about what other's have encountered with oil pressure gauges? Thought this was an appropriate question to go along with original post.