The Ford Barn - View Single Post

slowforty · 01-03-2018, 05:59 PM

I did not do mine and one side let go. Was leaking combustion into the cooling system.went from 0 to 275 degrees in 10 minutes. anyway put in a new composite gasket on the leaking side. Retorqued it at about 100 miles and did it again after another 150 miles,but then again I am not on an Island. By the way how big is the Island anyway. I would guess you never take the keys out of any of your vehicles.

01-03-2018, 05:59 PM	#13
slowforty Senior Member Join Date: May 2010 Location: Tinley Park Ill Posts: 1,061	Re: Heads for factory replacement block I did not do mine and one side let go. Was leaking combustion into the cooling system.went from 0 to 275 degrees in 10 minutes. anyway put in a new composite gasket on the leaking side. Retorqued it at about 100 miles and did it again after another 150 miles,but then again I am not on an Island. By the way how big is the Island anyway. I would guess you never take the keys out of any of your vehicles.