The Ford Barn - View Single Post

Mike V. Florida · 04-01-2014, 02:57 PM

I read that the original model B cams needed more clearance on the exhaust valves. Ford recommended .022 on the model B exhaust valves with the B cam.

The original B cam and lifters requires .015 intake.

There is some great info here;

http://www.fordgarage.com/

04-01-2014, 02:57 PM	#2
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Model B valves I read that the original model B cams needed more clearance on the exhaust valves. Ford recommended .022 on the model B exhaust valves with the B cam. The original B cam and lifters requires .015 intake. There is some great info here; http://www.fordgarage.com/ __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II