The Ford Barn - View Single Post - Original Headlight socket & connector hardware

david801 · 08-19-2013, 06:51 PM

Steve, Im not sure I understand you. The brass terminal in the second picture is in the side of the plug with the color code letters. The holes for the terminal are larger on that end. I tried to insert the brass terminal into the other end but the only way it would fit was with a hammer. The latest Bratton's cataloge(page 80) says "Plastice plug part (20810) with coded letters R,Y,G are facing the headlight bucket".
I think the previous posting about the overall length of the plastic plug and brass terminal together are .680", so the brass terminal must stick out above the plastic plug? Thanks eveyone for the comments.

08-19-2013, 06:51 PM	#30
david801 Member Join Date: May 2010 Location: Farmington, Utah Posts: 77	Re: Original Headlight socket & connector hardware Steve, Im not sure I understand you. The brass terminal in the second picture is in the side of the plug with the color code letters. The holes for the terminal are larger on that end. I tried to insert the brass terminal into the other end but the only way it would fit was with a hammer. The latest Bratton's cataloge(page 80) says "Plastice plug part (20810) with coded letters R,Y,G are facing the headlight bucket". I think the previous posting about the overall length of the plastic plug and brass terminal together are .680", so the brass terminal must stick out above the plastic plug? Thanks eveyone for the comments.