The Ford Barn - View Single Post - 33-34 fuel pump mount repair

cas3 · 04-26-2019, 08:37 AM

i just went thru this. if you use the later base, then the baffles are in the base, not the upper tube. its 1 3/4 pipe that fits, i have one car with exhaust tubing for pipe, and in my jalopy thread thats aluminum. both had to be turned on the lathe on the inside of the top to fit the cap inside. i have model A's in the barn, will check later when i get out there, i think they will be the same OD, but still not fit the cap on top

04-26-2019, 08:37 AM	#2
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,578	Re: 33-34 fuel pump mount repair i just went thru this. if you use the later base, then the baffles are in the base, not the upper tube. its 1 3/4 pipe that fits, i have one car with exhaust tubing for pipe, and in my jalopy thread thats aluminum. both had to be turned on the lathe on the inside of the top to fit the cap inside. i have model A's in the barn, will check later when i get out there, i think they will be the same OD, but still not fit the cap on top