View Single Post
Old 04-09-2012, 06:52 AM   #121
Vic Piano
Senior Member
 
Vic Piano's Avatar
 
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
Default Re: What I Did on My Lunch Hour

Quote:
Originally Posted by Ken/Alabama View Post
The dogbone you removed isnt correct for the Zephyr . The other two look to be correct. The Zephyr dogbone doesnt have a rubber bushing inside of it,the steel ball end of the stud is crimped in there much like a ball joint or tie rod end.
Ken, I know that the dog bones that were on the car are not the correct ones; they measured 5 inches while the correct measurement is 4 inches. The replacement NOS dog bones are correct. I'm anticipating noticeable ride improvement with the rear shocks that were rebuilt by Bill Wzorek.
__________________
Imagination is more important than knowledge.
Vic Piano is offline   Reply With Quote