The Ford Barn - View Single Post

joe plumber · 01-05-2018, 07:20 PM

[QUOTE=woodypecker;1575208]I have a 400jr and it is a pita to adjust. I have to measure the clearance then raise the lifter in the bore and adjust by trial and error. So drill the holes if it is not too late.[/QUOT

01-05-2018, 07:20 PM	#15
joe plumber Senior Member Join Date: May 2010 Posts: 820	Re: Adjusting Flathead V8 Lifters [QUOTE=woodypecker;1575208]I have a 400jr and it is a pita to adjust. I have to measure the clearance then raise the lifter in the bore and adjust by trial and error. So drill the holes if it is not too late.[/QUOT Last edited by joe plumber; 01-05-2018 at 07:24 PM. Reason: Wrong quote