The Ford Barn - View Single Post

Floyd · 09-13-2020, 01:51 PM

Sliding slightly off the original topic, but hey, we do that a lot. As noted above, for anyone wanting a top quality clear coat , the SprayMax is the answer. It is a 2K urethane material made in Germany and sold in spray cans. The nozzle will produce a "can finish" as good as you can get with your Sato gun. Since it is 2K, the life is limited after activating, but I have had it last 3 days. Top quality stuff. Many high end paint shops use this for small exterior repairs rather than mixing up a batch of their Glasurit clear. I just used it to finish a set of Porsche fuchs wheels. It is about $22 to$ 25 a can but a swinging deal for what you get. Same story as lots of things, top quality , not cheap, you decide.

09-13-2020, 01:51 PM	#36
Floyd Senior Member Join Date: May 2010 Posts: 468	Re: Rust Oleum spray cans Sliding slightly off the original topic, but hey, we do that a lot. As noted above, for anyone wanting a top quality clear coat , the SprayMax is the answer. It is a 2K urethane material made in Germany and sold in spray cans. The nozzle will produce a "can finish" as good as you can get with your Sato gun. Since it is 2K, the life is limited after activating, but I have had it last 3 days. Top quality stuff. Many high end paint shops use this for small exterior repairs rather than mixing up a batch of their Glasurit clear. I just used it to finish a set of Porsche fuchs wheels. It is about $22 to$ 25 a can but a swinging deal for what you get. Same story as lots of things, top quality , not cheap, you decide.