View Single Post
Old 06-10-2015, 08:41 AM   #11
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: Transmission flush help

Quote:
Originally Posted by flatheadmurre View Post
GL-1 and GL-3 doesnt have any EP additives that can harm the redmetals.

A modern good engine oil will do the job as good as a GL-1(i will get beaten for this...)

Flushing the gearbox...you have plenty of room for slush in it just change the oil and run it.
Believe GL-3 does have EP additives, just at a lower level than GL-4.

API GL-1
Straight mineral oil

API GL-2
Mild EP for worm gears

API GL-3
Mild EP for spur and spiral bevel gears in axles and transmissions

API GL-4
Medium EP, MIL-L-2105 quality, moderate severity hypoid gears, manual

transmissions
API GL-5
High EP, MIL-L-2105D quality, all hypoid axles, some manual transmissions

API GL-6
Extra high EP, now obsolete


Last edited by JSeery; 06-10-2015 at 09:05 AM.
JSeery is offline   Reply With Quote