The Ford Barn - View Single Post

Gasoline · 07-28-2013, 03:04 PM

This is a great forum!

OK, I´m gonna stick to my Mallory distributor, original resistance wire, MSD blaster 2 coil and the ballast resistor. It might have been a bad condenser (out of the box) that killed my car that sunny day. I also noticed that I installed the condenser bracket upside down so it was pressing against the distributor lock and maybe it did not close properly - it´s a vacuum advance.

07-28-2013, 03:04 PM	#32
Gasoline Junior Member Join Date: Jul 2013 Posts: 17	Re: Mallory tech answer to coil/ballast ? This is a great forum! OK, I´m gonna stick to my Mallory distributor, original resistance wire, MSD blaster 2 coil and the ballast resistor. It might have been a bad condenser (out of the box) that killed my car that sunny day. I also noticed that I installed the condenser bracket upside down so it was pressing against the distributor lock and maybe it did not close properly - it´s a vacuum advance.