The Ford Barn - View Single Post

Dave/Green Bay · 03-20-2020, 08:03 AM

Jack: Had a new Max1 for my engine. When we installed with standard cam bearings the can rattled around. Cam was 10 under on the bearing surfaces. Check carefully. Dave/Green Bay

03-20-2020, 08:03 AM	#2
Dave/Green Bay Senior Member Join Date: May 2010 Location: Green Bay Posts: 391	Re: Isky cam Jack: Had a new Max1 for my engine. When we installed with standard cam bearings the can rattled around. Cam was 10 under on the bearing surfaces. Check carefully. Dave/Green Bay