Re: 1933 inner fender question?
Posted this a few years back but maybe it will help here .
I start with the hood and radiator .
If the radiator is centered and the right height the hood to cowl gaps should be even all the way around .
If the gaps are tighter on the right the radiator needs to move left .
If the gaps are tighter on the left the radiator needs to move right .
MAKE SURE the radiator is level with the cowl !!!!!
If the gaps are wider at the bottom of the hood sides than on top your radiator is too high .
If the gaps are tighter at the bottom of the hood sides than on top your radiator is low .
There will be more but let us know what you have on this part .
Like already stated this is your foundation and all else works off this and a center hinge slightly long can really ball up the works .
Last edited by David J; 02-24-2020 at 03:19 PM.
|