View Single Post
Old 04-29-2019, 07:25 PM   #5
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,531
Default Re: Best coil to use with a petronix ign

For the 12 volt Pertronix I would go with their flame thrower coil . Not only have I had thousands of trouble free miles using the stuff in my roadster i also used the conversion and coils to set a number of very fast records with my Flatheads on the salt flats. Gotta say something about their quality the way I see it.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote