The Ford Barn - View Single Post

SSsssteamer · 03-08-2018, 07:29 PM

The bolt hole in question was not found on my 1929 Tudor's frame rail either. So I mounted the bracket on the left frame rail under the shock absorber, as per the instructions, and then I drilled the hole in the frame using the bracket's hole as a template as where to drill. The whole Panhard Bar installation could be done in less than an hour.

03-08-2018, 07:29 PM	#88
SSsssteamer Senior Member Join Date: Nov 2010 Location: Sedro-Woolley, WA Posts: 1,023	Re: Rear Panhard Bar ? The bolt hole in question was not found on my 1929 Tudor's frame rail either. So I mounted the bracket on the left frame rail under the shock absorber, as per the instructions, and then I drilled the hole in the frame using the bracket's hole as a template as where to drill. The whole Panhard Bar installation could be done in less than an hour.