Quote:
Originally Posted by Synchro909
I'm wondering if it would be possible to put a Panhard Bar from a bracket mounted to one side of the rear axle using the bolts at the brake backing plate, past the back of the diff and to a bracket on the back of the chassis. That would be better than the 1/2 length bar shown if it is possible. The brackets would have to be long enough to clear the diff and the longer they are, the weaker they are.
Would the improvement over the 1/2 length bar be enough to justify the work???
|
The Panhard bar in length is actually over half the distance between the frame rails. The mount on the rear axle pivots from the opposite side of the axle's center housing giving you well over half the width of the frame in the bar's length. The bar works very well and no more improvement is needed that I can tell.