Quote:
Originally Posted by jg61hawk
It's a 29. I'll look at the arm and if the axle has a shoulder or grease...or what. I'll get another picture or two. I'll mark the new pin with some paint and spin the drum and remove it and see if the paint is marked. We'll see.
|
sounds like a plan - if the studs were hitting it the stud heads should have score lines. Might have to push and pull on the drum as you rotate it to simulate the real world forces.
The cotter pin didnt fall out or the pin itself too long to where it could have worked its way out to get hit by the studs did it?