The Ford Barn - View Single Post - Front engine mount for 292 Y-block

55blacktie · 11-23-2020, 08:16 PM

The front mount can be removed/replaced without removing the engine. I would use blocks, or some other means, to support the front of the engine before removing the mount. If the engine moves while the mount is removed, it might be difficult to line up the replacement mount during installation.

You might be okay with the existing mount, if everything lines up, and there are no clearance issues. The rear/transmission mount will prevent the engine from tilting too far backwards.

11-23-2020, 08:16 PM	#4
55blacktie Senior Member Join Date: Aug 2020 Posts: 442	Re: Front engine mount for 292 Y-block The front mount can be removed/replaced without removing the engine. I would use blocks, or some other means, to support the front of the engine before removing the mount. If the engine moves while the mount is removed, it might be difficult to line up the replacement mount during installation. You might be okay with the existing mount, if everything lines up, and there are no clearance issues. The rear/transmission mount will prevent the engine from tilting too far backwards.