View Single Post
Old 11-17-2020, 12:47 AM   #35
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: transmission question

Quote:
Originally Posted by samsonized View Post
i did not realize you had to cut the floor and the frame.
Just a Wild-Assed-Guess (WAG), but you MIGHT be able to get by with severely trimming that center "box" on frame to get that T5 (with "S-10" tail) in there. Below is a picture of the stock trans (Thanks Kube)and it's proximity to the BOX between "X"-rails, while keeping in mind that the T5 with the S-10 rear tail housing is (I believe ) 25-1/2" long....front of case to rear of tail housing. DD

__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote