The Ford Barn - View Single Post

Big hammer · 09-11-2017, 08:53 AM

Remove the gas line at the carburetor and check for good gas flow. If gas lines are inserted to deeply it will restrict fuel flow. If you then have good fuel flow to the carburetor, you may need to work your carburetor over again :-(

09-11-2017, 08:53 AM	#3
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: Starting for the first time in 10 years! Remove the gas line at the carburetor and check for good gas flow. If gas lines are inserted to deeply it will restrict fuel flow. If you then have good fuel flow to the carburetor, you may need to work your carburetor over again :-( __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done