View Single Post
Old 01-01-2021, 01:10 PM   #2
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 6,667
Default Re: Banjo rearend rebuild

If everything else is good and the pattern is good you should be able to just replace the axle. Be sure to measure the shims on the housing when taking it apart and replace with the same. How did you break the axle, not enough torque on the axle nut? If that is the case be sure the other side doesn't have a crack starting to work its way through it. If you are running hydraulics you might want to look into safety hubs or clips.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)