Re: exchange 8ba cyl heads with 59ab
It is not really a big deal . . . I ran 49-53 heads on a 59x engine in my 34 Ford. Yes, I had to figure out how to "shim" the waternecks (with a piece of rubber tubing), but outside of that, nothing to be too concerned about.
If you think about it - a 59AB has water outlets in a VERY different location than a 36 engine . . . the 49-53 heads are a LOT closer to what a 36 had . . . than a 59AB.
So - in my mind - the later heads are actually more similar to the originals (location of hoses) than anything from 37 - 48. Yes - you have to plug an 'extra' hole in the 49-53 heads - no biggie.
Okay - enough bourbon for tonight . . . time for some sleep! LOL
|