View Single Post
Old 07-24-2020, 09:52 AM   #6
Mr 42
Senior Member
 
Mr 42's Avatar
 
Join Date: May 2010
Location: Sweden
Posts: 417
Default Re: PCV VALVE SYSTEM for 8BA with Early Intake Manifold

Sponsored Links (Register now to hide all advertisements)
Made a similar solution back in 2004 on my 8RT engine.
Did not use a PCV valve, my reason for this was that Volvo B18/B20 Engines, had a line from the crankcase to the intake and the hole entering the intake was around 2mm, not causing any problem for the engine and keeping the crankcase clean.
Since this was a V8 i used a 2.5mm hole.

I let the pictures do the talking.

By the way i don't own the car now , but the new owner is still driving it without problems.
Attached Images
File Type: jpg 110-1004_IMG (Large).jpg (61.6 KB, 114 views)
File Type: jpg 110-1012_IMG (Large).jpg (30.5 KB, 108 views)
File Type: jpg 110-1023_IMG (Large).jpg (41.6 KB, 105 views)
File Type: jpg 110-1029_IMG (Large).jpg (30.8 KB, 110 views)
File Type: jpg 110-1030_IMG (Large).jpg (37.5 KB, 108 views)
File Type: jpg 110-1031_IMG (Large).jpg (47.9 KB, 105 views)
File Type: jpg 111-1190_IMG (Large).jpg (78.2 KB, 109 views)
Mr 42 is offline   Reply With Quote