View Single Post
Old 12-16-2019, 03:25 PM   #9
Join Date: Sep 2016
Location: Manchester, Mich
Posts: 35
Default Re: Transmission gear/shaft question

Thanks for all the replies, I tried moving the gears back and forth on the shaft but did not have any luck. I called Snyder's and they acknowledged that there were some problems with some shafts. They are going to send me another and test it with gears before they send it out. I had another suggestion that might also have worked and that was to use a brake cylinder hone, as I didnt have one, I opted for the new one, hopefully it will work.
Kentmac is offline   Reply With Quote