View Single Post
Old 12-26-2018, 04:58 PM   #36
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: 1934 Spark/ Ignition Issue

Quote:
Originally Posted by dbtenner View Post
The image of the fuse block is not original to a 34, that is a later model panel out of something like a 40. The original fuse block would have a fuse, the one posted is a circuit breaker, as used on the later models.

The first photo I attached is similar to what would have been in the car originally. The second post is a later single circuit breaker panel (with the ballast resistor turned the correct way).

You are dealing with a mix match set of components, which should work fine, but it will not match up visually with the original parts.


Is the starter solenoid floor mounted with foot operated switch on it or a firewall mounted which uses a pushbutton on the dash?
Attached Images
File Type: jpg Fuse - Resistor Block 40-12250.jpg (66.5 KB, 10 views)
File Type: jpg Fuse 01A-12250-breaker-resistor.jpg (89.4 KB, 8 views)

Last edited by JSeery; 12-26-2018 at 05:11 PM.
JSeery is offline   Reply With Quote