The Ford Barn - View Single Post

CWPASADENA · 07-19-2011, 10:35 AM

As stated before, You will get a better job if you have a machine shop who has a Sunnen Piston Pin Hone do the job. Much better fit then you will ever get with a reamer.

I have a small machine shop and the reamers BUT I will still take my spindles down the street to my local Automotive Machine Shop to hone the bushings.

That is what I do.

Chris

07-19-2011, 10:35 AM	#15
CWPASADENA Senior Member Join Date: May 2010 Location: PASADENA, CA Posts: 1,885	Re: $127.00 for a drill Bit!? As stated before, You will get a better job if you have a machine shop who has a Sunnen Piston Pin Hone do the job. Much better fit then you will ever get with a reamer. I have a small machine shop and the reamers BUT I will still take my spindles down the street to my local Automotive Machine Shop to hone the bushings. That is what I do. Chris