Re: Car Will Not Start--No Apparent Spark
I got my volt meter out tonight. With the ignition on (i.e., popped out), I'm getting:
6 volts on movable arm with points open (this looks correct)
6 volts on movable arm with points closed (this does not look correct, but I cannot explain it)
6 volts on both sides of the coil
.2 volts on driver side of junction box
0 volts on passenger side of junction box
When I put a jumper across the junction box, I get 0 volts on both sides of the junction box (I cannot explain this)
|