Re: Engine noise?
This "kit" insulates the plunger (starter rod) from the switch. The little cross goes in the end of the plunger (starter rod). If you are getting sparks you better check out your switch.
https://www.snydersantiqueauto.com/P...earchByKeyword
Maybe think about getting a housing insulator while you are at it. https://www.snydersantiqueauto.com/P...-INSULATOR-KIT
__________________
Ruth
"Sometimes you really DO need to read the whole thread"
Last edited by Ruth; 07-13-2020 at 11:47 AM.
|