The Ford Barn - View Single Post

Big hammer · 04-22-2020, 04:59 PM

With out a shaft try installing a dizzy and see if it fits, the bores on the pin or the larger bore could be buggered. If you are using a long shaft I suggest using the original TWO piece shaft !

04-22-2020, 04:59 PM	#7
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: Problem installing distributor With out a shaft try installing a dizzy and see if it fits, the bores on the pin or the larger bore could be buggered. If you are using a long shaft I suggest using the original TWO piece shaft ! __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done