Quote:
Originally Posted by my40ford
The windlace from the top of dash that goes down to the floor is what I am referring to. I'm not sure if the dash has to be removed a little to glue it. But isnt there a rubber tack that goes from underneath dash to the floor to staple windlace to?
|
The windlace (vertical part at "A" pillar) was originally nailed directly in to the sheet metal all the way to the floor.
I tend to glue mine these days.
The cowl kick panel retainer goes over the lower part of the windlace.
I would strongly suggest you remove the dash. I suppose you could "cheat" the windlace in with the dash installed but it won't be a first rate job.