Quote:
Originally Posted by Bassman/NZ
The Hamb is the correct and proper place for this question because there's many there that have done it.
The best way is to pinch (narrow)the frame in the cowl area to match the body width, in fact repo 32 frames can be bought with this already done. However, most old time hot rods never bothered with this, so it depends what you're aiming for.
The other problem is the gap that occurs between the body and frame. Some folks channel the body a little until the gap disappears, others make a filler to sit on top of the frame.
|
Bassman,
'depends what you're aiming for'. It I had a clue, I wouldn't be asking.
Thanks for your input/thoughts! I haven't got the '32 frame yet and wanted to make an AV8..without any knowledge/experience, don't know whether to start with A frame/'32 frame or as you mentioned repo
!
Off to see the Hambers, I guess!