The Ford Barn - View Single Post - Need a little help installing flyweel/tranny

Tom Wesenberg · 12-31-2016, 11:00 AM

If you don't happen to have a clutch disc alignment shaft tool, then you can also align the disc by feeling around the outer edge to get the disc centered on the pressure plate as the pressure plate bolts get tightened. I've done this a few times and the tranny slipped right into place.

12-31-2016, 11:00 AM	#8
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Need a little help installing flyweel/tranny If you don't happen to have a clutch disc alignment shaft tool, then you can also align the disc by feeling around the outer edge to get the disc centered on the pressure plate as the pressure plate bolts get tightened. I've done this a few times and the tranny slipped right into place.