View Single Post
Old 03-18-2019, 09:50 AM   #8
Big hammer
Senior Member
 
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,133
Default Re: 1929 Tudor Door hinge pin replacement

Quote:
Originally Posted by Magicbox51 View Post
Find someone in your local club who has an air (pneumatic) air hammer. Small size. After about a minute or less, it will come right out. Mask around it well and hold it steady because it will tend to wander. Mine were really stubborn but it only took a minute or so with that tool. I might add that mine was before painting, but I was still careful to keep it from wandering.
I worked for hours trying to remove the pins, went for a break and at a farm supply store I bought an air hammer kit for less than 20$, the pins jumped out
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
Big hammer is online now   Reply With Quote