The Ford Barn - View Single Post

rockfla · 03-27-2020, 01:11 PM

Kube
I use #14 because that is the way (modern) "Tapping" screws are commercially done not by fraction designation SO #14 would be 1/4 (or very very close decimal-ly). .2515 as I currently Mic one!!! KUBE the "bigger" question for me IS with ALL of the 39 & 40 exploits and restorations you have done HOW is it that a Mercury has never been the object of your perfection!!!!

03-27-2020, 01:11 PM	#5
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 3,963	Re: 39 Mercury trans cover/shifter seal? Kube I use #14 because that is the way (modern) "Tapping" screws are commercially done not by fraction designation SO #14 would be 1/4 (or very very close decimal-ly). .2515 as I currently Mic one!!! KUBE the "bigger" question for me IS with ALL of the 39 & 40 exploits and restorations you have done HOW is it that a Mercury has never been the object of your perfection!!!! Last edited by rockfla; 03-27-2020 at 01:20 PM.