Re: 1955 ford with 2 barrel ford carb
Quote:
Originally Posted by miker98038
I’ve used this grommet with baffle in the valley cover, worked fine with a stock motor. With the next stroker motor and supercharger, it wasn’t enough and I have to go with a welded baffle. It was solid on the side facing the distributor, the gear was apparently throwing enough oil at high rpm and boost that I picked up oil beyond what the rubber baffle could handle.
https://www.moroso.com/pcv-grommet-b...-package68772/
|
Just a clarification of how that grommet is designed -
There is a slit in the bottom of that closed grommet that will allow draw hopefully without ingesting vapors.
__________________
*****
- MULTI-VEHICLE SYNTHETIC TRANSMISSION FLUID -
Multi-vehicle transmission fluids are becoming more and more popular in the marketplace. Oil marketers design these fluids for a wide range of automatic transmission types. While they are not licensed by any specific auto manufacturer ... ??? ... enough said ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order)
Last edited by KULTULZ; 11-16-2019 at 12:45 PM.
|