The Ford Barn - View Single Post

frnkeore · 09-06-2019, 01:05 AM

A pickle fork is the easiest way. I think they cost about $8 at Harbor Freight.

If it's REALLY tight, drive the fork in and hit the nut. If it doesn't come that way, heat will be the only answer.

09-06-2019, 01:05 AM	#5
frnkeore Senior Member Join Date: Jul 2019 Location: Southern Oregon Posts: 782	Re: Tie Rod End Removal A pickle fork is the easiest way. I think they cost about $8 at Harbor Freight. If it's REALLY tight, drive the fork in and hit the nut. If it doesn't come that way, heat will be the only answer.