The Ford Barn - View Single Post - The Terry Burtz 5 main bearing engine blocks are back on track.

Terry Burtz, Calif · 01-06-2022, 03:10 PM

The latest revision of the “Builders Guide” dated 3 January 2022 is on the website (www.modelaengine.com) under the tab “Guides”. Added material includes a head nut torquing sequence, source of Silv-O-Lite thin ring pistons, a caution about using pistons with offset wrist pins, sealing the #1 and #3 main bearing studs with an O-ring, added part numbers for SKF/Chicago rear main seals, added engine builders and parts suppliers, and unwarranted modifications. Please use this latest “Builders Guide” when building an engine.

We will be at the Turlock, CA Swap Meet on January 29 and 30, 2022 (www.turlockswapmeet.com) held at the Stanislaus County Fairgrounds. We will be in building VO and sharing space ID with John Lavoy which is across the aisle from the snack bar.

We will display the “New Engine Kit”, “New Flywheel”, and “New Camshaft”, and offer a discount for orders placed at the Turlock Swap Meet. I will be there to answer any questions.

01-06-2022, 03:10 PM	#480
Terry Burtz, Calif Senior Member Join Date: May 2010 Location: Campbell,CA, USA Posts: 319	Re: The Terry Burtz 5 main bearing engine blocks are back on track. The latest revision of the “Builders Guide” dated 3 January 2022 is on the website (www.modelaengine.com) under the tab “Guides”. Added material includes a head nut torquing sequence, source of Silv-O-Lite thin ring pistons, a caution about using pistons with offset wrist pins, sealing the #1 and #3 main bearing studs with an O-ring, added part numbers for SKF/Chicago rear main seals, added engine builders and parts suppliers, and unwarranted modifications. Please use this latest “Builders Guide” when building an engine. We will be at the Turlock, CA Swap Meet on January 29 and 30, 2022 (www.turlockswapmeet.com) held at the Stanislaus County Fairgrounds. We will be in building VO and sharing space ID with John Lavoy which is across the aisle from the snack bar. We will display the “New Engine Kit”, “New Flywheel”, and “New Camshaft”, and offer a discount for orders placed at the Turlock Swap Meet. I will be there to answer any questions.