Re: The Terry Burtz 5 main bearing engine blocks are back on track.
Quote:
Originally Posted by JOHNCL
I have been thinking of adding O-rings beneath the castle nuts (in addition to the other sealants suggested by Terry. Those studs and their holes are subjected to the same oil pressure as the bearings. I want to avoid any leakage at the castle nuts' interface with the block. What do you guys (and Terry) think?
|
Snyder's has sealing washer available. https://www.snydersantiqueauto.com/p...id=978757&cat=
__________________
Ruth
"Sometimes you really DO need to read the whole thread"
|